The four-in-one sensor is mainly installed on the ceiling. It is a device that can sense external signals and physical conditions (such as light, movement, temperature, and humidity), and transmit the sensed information to other devices (such as dimmers, relay) to achieve its function. Connect to the EIB / KNX system through the EIB bus terminal block, and use the engineering design tool software ETS software (version ETS4.0 or later) to assign physical addresses and set parameters.
Function description:
(1) Illumination, temperature, humidity value cycle output function
(2) Illumination, temperature, and humidity control two channels each, which can output 1bit, 4bit, 1byte data
(3) Infrared mobile trigger control function
(4) Temperature change trigger control function
(5) Humidity change trigger control function
(6) Infrared movement and brightness logic function
(7) Infrared mobile master-slave function
(8) Enable or disable the channel control output function of illuminance, infrared movement, temperature, and humidity through the object
(9) Combined use of illuminance and movement to jointly control the function of light
(10) Combined use of temperature and humidity can jointly control the switch of the air conditioner
(11) Four-in-one sensor for infrared movement, illumination, temperature and humidity
Leave a message 
